Off Line Transformer Oil Purification
We are designing Transformer Oil Filtration and Purification Plant, which is utilized for dehydration, filtration and degassing of insulating oil that is used with electric cables, switch gears and transformers. This easy to operate and compact equipment is provided with degassing column with single, two or three stage version. Known for precise engineering, Transformer Oil Filtration Plant is fabricated in different specifications to cater to varied requirements of diverse industries.
Features: |
Capacity ranges from 50 LPH to 24000 LPH |
Inlet mesh filter is easy to clean and used to catch hold coarse dirt |
Standard efficiency of 0.5 / 1 Micron cartridge filter |
Heat exchange through very low specific power electric heaters |
To improve the vacuum pumping speed,vacuum pumpset in combination with rotary vane vacuum pump and roots pump are provided |
This easy to operate and compact equipment is also provided with pneumatic wheels for easy transport on road |
Oil Filtration and Purification plant
To obtain good performance from electric transformers, the insulating oil should be free from moisture, dissolved gases and particles. Even new oils require some treatment to limit these contents to suitable levels. A contaminated oil loses its characteristics of dielectric strengths, resistively and loss factor. Moisture in addition favors acid and sluge formation.
The CEE DEE insulating oil treatment equipment has been designed specifically for the filtration, dehydration and degassing
of the insulting oils used with transformers, electric cables, switch gears etc.
Parameters |
Before Conditioning |
After Conditioning |
| Removal of Moisture | 100 PPM | 3 PPM |
| Removal of dissolved Gases | 10% by vol. | 0.1% by vol. |
| Break down voltage | 20 KV | 70 KV |
| Vacuum level of degassing | - | 0.1 mbar |
| Chamber | - | - |
| Filtering capacity | Many micron | 1 Micron |
|
|
|||||||||||||||||||||||||||||||||||||
